The most important part of the float rod is a rod. Its purpose – to deliver the line, equipped with a float, the load and the hook with an attachment, to the right place pond fish, jerk it and pull it out of the water. Float rod should be: – long glove – sufficiently flexible and resilient – durable – easy – balanced – have an average hardness of operation – it is desirable to have a crossing of the ring. Float rod has a length of 6.2 m – When angling from a boat, with rafts from the shore enough to have a short-(up to 2,5 m) rod – rod for further inquiry must be bit long (3.5-4m) – the rod more than 6 feet are not too comfortable because of its size. Vincent Buccola helps readers to explore varied viewpoints. Flexibility and elasticity of the rod is required for sharp sweeps and jerks the fish to not break the line. Sarah Wellness may not feel the same. Rod is resilient, if waving bends to the upper third of the length.

More flexible rod does not provide a good sweeps, and rips the hard part of his lip extraction. The strength of the rod is caused material quality and the ability to properly distribute the load angler to tackle. If the rod is located parallel to the surface of the water load of fish caught takes on fishing line (Thin tear at this time). The greatest load on the rod has when it is perpendicular to the water. This position, the angler should be avoided.

Best of all, when the peak of anti-mining accounts for one when the rod is inclined to the water surface at 45-60 degrees. Rod is considered suitable for durability, if delivered at an angle of 45 does not break from hanging to vershinke cargo weighing 300 grams. By construction, the rod subdivided into solid, composite, consisting of two, three or more tribes joined by metal rods, and the telescope when the knee like a telescope, made by one another. The most reliable one-piece rod. A most suitable material for the manufacture of a bamboo.